If 0 is set, the same magnification selected by setting 1 is selected.
This manual also for: Oi mate d, comments to this Manuals, latest comments: Bookmark.
Parameters, and macro variables.
Be sure that all of the files above operators manual - i-Logic.19 parameters OF pitch error compensation pokemon red hack jar #7 3605 #6 #5 #4 #3 ROPx #2 #1 #0 BDPx note When this parameter has been set, the power must be turned off before operation is continued.Fanuc Common Parameters cheat sheet.Description OF parameters note 1 For bell-shaped acceleration/deceleration, the function for bell-shaped acceleration/deceleration after cutting feed interpolation is required.
PDF.pdf, size: 11917.
Upload manual upload from disk upload from url, thank you for your help!
Of the compensation position of the reference position (Machine stroke length in the negative direction/Interval between the compensation points) /50 1.
Number of the pitch error compensation position at extremely positive position for each axis 3622 note When this parameter is set, the power must be turned off before operation is continued.
388 - B-64120EN/01.Description OF parameters Pitch error compensation amount (absolute value) 4 3 2 Reference position B-64120EN/ (mm) Example 2 For the rotation axis Amount of movement per rotation: 360 Interval between pitch error compensation position:.Pitch error compensation value (absolute value) 3 2 1 Reference position -1 -2 Compensation position number Set compensating value Pitch error compensation position (number) - 178 - B-64120EN/01.3 This parameter cannot be used together with: - Macro executor - Basic operation package - Macro call argument 3460 Address for second miscellaneous function Data type Byte This parameter specifies the address used for the second miscellaneous function, as follows: Address Set value.Description OF parameters 3623 Magnification for pitch error compensation for each axis B-64120EN/01 note When this parameter is set, the power must be turned off before operation is continued.Of the farthest compensation position in the negative direction for the rotation axis is always equal to the compensation position.Axes names cannot be used to specify the address.Data type Unit of data Valid data range Word axis Number 0 to 1023 Set the number of the pitch error compensation position at the extremely positive position for each axis.